|

|
- Sleeve up to 3000 CDs per hour
- Paper, cardboard, plastic &
tvyek sleeves
- Bench top unit
- Fully transportable
- Just minutes to set up
|
|
The 120BC CD Business Card Sleever is designed as an easy-to-use
bench-top unit capable of sleeving CD Business Cards and 8cm CDs
in volumes more normally expected from expensive floor mounted models.
It can handle over three thousand CD Business Card sleeves per hour
with cost savings of around 80%. The 120BC can be quickly set up
to deal with different types of sleeves - paper, plastic, tyvek
or cardboard - a feature which will be attractive to operators needing
to accommodate small runs in their programme.
The unit has an integral four digit counter, a selectable automatic
stop after every set run of disks (adjustable from 0 9999)
and can also easily be set to process users own spindles.
The 120BC provides a versatile, dependable and transportable CD
Business Card and 8cm CDs sleeving unit at a price to meet
the tightest of budget constraints, whilst the output of up to 55
CDs per minute means it can compete with the more expensive
heavyNet Weights.
|
Specifications:
Sleeve Sizes: Minimum width: 2.4" (60mm)
Note 1: Sleeve width is dependant on the dimensions and type of business
card.
Note 2: Sleeve width measurement is made between welds with no card inserted
Cards with 2 rounded ends: Width + 0.16" (4mm)
Cards with 4 square corners: Width + 0.24" (6mm)
For special sleeve widths please contact Verity Systems
Cards: Maximum 2.7" (68mm) No minimum
8cm CD's: 3.1" (80mm)
Speed: 50 to 55 per minute
Power Supply: 100 to 240v, 50 or 60Hz (self adjusting)
Vacuum Required: 800mbars
3m³hour (2.94psi absolute @1.8CFM
Air Pressure Required: 2 to 4 bars
6m³/hour (30-60psi @ 3.6CFM)
Hopper Capacity: 180 sleeves (medium thickness)
Dimensions: Height: 22" (560mm) Width: 15" (380mm) Depth: 31.5"
(800mm)
Net Weight: 38kgs
Option: Flap folder for self adhesive sleeves
We reserve the right to ammend this specification
without notice
|